FILTER PRESSES

Category

Item #

Description

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 3288 Eight Filter press side bars, 184" long, 8 3/4" wide, 1 3/4" thick.

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 3289 Two Filter press side bars, 147" long, 8" wide, 1 1/2" thick.

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 3290 Two Filter press side bars, 120 1/2" long, 5" wide, 1" thick.

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 3118 JWI Test Filter Press, 470 mm, 40 mm pre-squeeze cake thickness. .38 cu ft, mix pack membrane, corner feed, high pressure 225 psi feed, frame is also drilled for center feed, air blow precoat even fill manifold, mounted on 4 way steel skid with wheels, 1" poly feed pump and regulator also on skid with cam lock fittings, hand hydraulic closure.

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 2004b Non-metallic fume hood, approx 7' long, 3' wide, 4' 10" tall, came off of a 630mm, 5 cu ft JWI filter press.
 

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 3262 Pac-Press Filter press, 470mm, 1 cu ft, CGR (gasketed plates), airblow manifold, hand hydraulic closure, with cake cart, filter media not with unit adder can be provided.

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

3283 Trionetics 470mm, 2 cu ft filter press, gasketed plates, 1 & 3 button porting, 14 chambers, airblow manifold, hand hydraulic closure, plastic cake chute, filter media not with unit adder can be provided.

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 3292 Beckart Filter Press, 470mm, 2 cu ft, 32mm cake thickness, 42 sq ft filtration area, 13 gasketed plates, 12 chambers, one blanking plate, hand hydraulic closure, not 1&3 button porting, airblow down manifold, self dumping cake cart, filter media not with unit adder can be provided.

FILTER PRESSES
PHOTO AVAILABLE
CLICK HERE

 3263 Pac-Press Filter press, 470mm, 3 cu ft, CGR (gasketed plates), airblow manifold, air over hydraulic closure, cake cart, filter media not with unit adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

 3271 JWI filter press, 630 mm, 3 cu ft, gasketed plates, extended legs, airblow manifold, air over hydraulic closure, manifold will be reworked

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

 2318 Shriver Filter Press, skeleton only, 630mm, corner feed for recessed plate or could be used as a plate and frame, each corner is ported.  Approximately 4' for plate stack, screw enclosure with hydro assist, type 24, s/n 6223491, filter media not included, adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

2070

Filtro-mono Filter Press, 500mm, Skeleton only, no hydraulics or manifold, is drilled for center feed, s/n 825, model 30/40, series 68, approx 70" for plate stack.

FILTER PRESSES

 3213 Lanco filter press, 630mm, 4 cu ft, hand hydraulic closure, airblow manifold.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

2330

Shriver Filter Press, 630mm, 6 cubic feet, CGR, 32mm cake, 20 chamber, center feed, 4 eyed discharge, 1 & 3 button type, air blow manifold, s/n 41623001AR, filter media is not included, adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

 2654 Durion Filter Press, 630mm, 6.3 cubic feet expandable to 8 cubic feet, 21 chamber to 26 chamber, non-gasketed, 1 + 3 button type plates, 32mm cake thickness, manufactured 1993, filter media is not included, adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

 2406 Industrial Filter Press, 630 mm, 7.5 cu ft, 32 mm cake thickness, gasketed plates, center feed, 4-eyed discharge, 1 + 3 button type, sandblasted and painted, filter medfia is not included, adder can be provided.

FILTER PRESSES
PHOTO 1
PHOTO 2

 3079 Beckart Filter Press, 630mm, 7.5 cu ft, 32mm cake thickness, 160 sq ft filtration area, CGR (gasketed) plates, air over hydraulic closure, 1&3 button plate porting, air blow down manifold, self dumping cake cart, filter media not with unit, adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

2055

One (1) previously used Clow Filter Press, 8 cubic foot, 36 inch polypropylene plates, 32mm cake thickness, 150 psi feed, 13 chamber, gasketed, centerfeed, 4 eyed discharge, over hanging plates, not side bar type, year 1982, liner pipes, no manifold. Filter media is not included, adder can be provided at additional cost. Plate stack will be new and ordered upon receipt of deposit. 4 to 6 weeks delivery

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

 3264 Beckart Filter press, 630mm, 9 cu ft expandable to 10.5 cu ft, 32mm cake thickness, 30 chambers expandable to 35 chambers, gasketed plates, air over hydraulic closure, with two self dumping cake carts, manufactured 2005, filter media not with unit adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

 3296 JWI filter press, 800mm, 15 cu ft, gasketed plates, 32mm cake thickness, new airblow down manifold, 30 chambers, auto pump control, Model # 800G32-20/30-10/15SA, filter media not with unit, adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

 3297 JWI filter press, 800mm, 15 cu ft, gasketed plates, 32mm cake thickness, new airblow down manifold, 30 chambers, auto pump control, Model # 800G32-30-15SYLS, filter media not with unit, adder can be provided.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

97179

Edwards & Jones Filter Press, 1000 MM, non-gasketed, 29 cubic foot expandable to 36 cu. ft., 225 PSI, has plate shifter, core blow, mfg. 1983, 35 expandable to 44 chambers, filter media is not included, adder can be provided. Electric screw closure.

FILTER PRESSES
 PHOTO AVAILABLE
CLICK HERE

3214

 JWI filter press, 1000mm, 40 cu ft, 50 chambers, airblow manifold, spread leg design, air over hydraulic closure.
 
 

Equipment Inventory - links

Water Works --
A Division of Polydisc, Inc.
P.O. Box 122 / 501 Foote Street
Crown Point, Indiana  46307
toll free: 800.232.9334
ph: 219.663.8210
fax: 219.662.1503

All content copyright - Water Works, A Division of Polydisc, Inc., Serviced By: CompUhelp Technical Services