Home :: Buy :: Sell :: Trade :: Contact
 
 
 

MIXERS

Category

Item #

Description

MIXERS
PHOTO AVAILABLE
CLICK HERE

2793

Lightnin mixer, Model NC-7, .25 hp, 115 volt, 1 phase, cup mount, stainless steel shaft and props,  33" long shaft, two 3.5" props

MIXERS
PHOTO AVAILABLE
CLICK HERE

2160

Mixer, no brake, 1/4 HP, 115 volt, 45" shaft, no prop, gearbox, 60 rpm out, needs repair.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2339

Mixer electric motor; 1/4 horsepower; 4.4 amps 115 volts Frame 56 RPM 1725-MOTOR ONLY.

MIXERS
PHOTO AVAILABLE
CLICK HERE

9680

Lightnin Mixer, Model #XD-30, .3 H.P., 115 V., cup mount, no shaft or prop, needs repair.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99333

Lightnin Mixer, Dura-Mix, .3 HP, 1725 RPM, 115/230 volt, needs repair, motor only.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99334

Lightnin Mixer, Dura-Mix, .3 HP, 1725 RPM, 115/230 volt, flange mount, no shaft, shaft would be 4 bolt flange mount.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99474A

Lightnin Dura Mix Mixer, .3 HP, 208-230/460 volt, 3 PH, clamp mount, gear reduced, no shaft or prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2492

Lightnin Air Mixer, model XJA-33, .33 hp, shaft 29" long, 1 - 6" prop. Cup mount not complete, needs repair.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2493

Lightnin Air Mixer, model XJA-33, .33 hp, shaft 22-3/4" long, 1 - 6" prop. Cup mount not complete, needs repair.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2662 Lightnin Mixer, Model V5P25, .33 HP, 208/460 volt, 3 phase, C-clamp mount, 27" long shaft with 1 - 11" diameter prop, both stainless steel. 350 RPM output

MIXERS
PHOTO AVAILABLE
CLICK HERE

2663 Lightnin Mixer, Model V5P37, .5 HP, 208/460 volt, 3 phase, C-clamp mount, 52" long shaft with 1 - 14" prop, both stainless steel. 350 RPM output

MIXERS
PHOTO AVAILABLE
CLICK HERE

2664 Lightnin Mixer, Model V5P25, .33 HP, 208/460 volt, 3 phase, C-clamp mount, 40" long shaft with 1 - 11" prop, both stainless steel. 350 RPM output

MIXERS
PHOTO AVAILABLE
CLICK HERE

99473 Lightnin Dura-Mix, 1/3 hp, 220 / 440 volt, no shaft or prop, missing part of clamp mount.

MIXERS
PHOTO AVAILABLE
CLICK HERE

9623

Lightnin Mixer, NLDG-33SCR, DC motor, 1/3 HP, 28" long shaft, 1- 8" prop., needs repair.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98014A

Mixer, Dayton motor, Model 2N915G, 1/3 HP, 1725/1425 RPM, 208-230/460 volt, 3 PH, right angle gear box reduction frame 11" wide x 54" long. No shaft or prop with unit.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98201

G.E. Mixer, Model #GS39, .5 H.P., 115 V, 1 ph., cup mount, stainless steel shaft 60" long, two (2) 8.0" three (3) blade props, gear box.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2340

Mixer Motor Only - Lightin, .5 HP, 115/230 volt, 1725 RPM, Model ND2.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2668 Eastern Mixer, 1/2 HP, 115/208 volt, 1 phase, cup mount (missing part of cupmount), gear box, no shaft or prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2669 Eastern Mixer, 1/2 HP, 90 volt, rigid mount, gear box, no shaft or prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99331

Mixer, Magnotek Century, AC motor, 1/2 HP. 1725 RPM, 60 Hz, 1 PH, 115/230 volt, clamp mount, 18" long 5/8" dia. shaft with 4" prop, stainless steel, Direct drive.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2666

Lightin Mixer, Model XJQ66, .65 HP, 220/240, 3 phase, rigid mount, no shaft or prop.

MIXERS

2801

Lightnin mixer, .65 hp, 208 / 440 volt, 3 ph, cup mount, no shaft or prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98244

Lightnin Mixer, Model XJQ65, .65 H.P., 3 ph, 220/440 V, rigid mount, stainless steel shaft 92" long, one (1) 6-3/4" prop, one (1) 12-1/2" prop, gear box.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99372

Lightnin Mixer, Dura-Mix, .65 HP, 1725 RPM, 115/230 volt, 60 Hz, flange mount, no shaft, shaft would be 4 bolt flange mount, gear box reduced.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98114

Lightnin Mixer, Model #ND2A, .75 HP, 230/460 V, 3 phase, cup mount, has shaft and prop in tank, #97143, gear box. 

MIXERS
PHOTO AVAILABLE
CLICK HERE

99206

Chemineer Mixer, Model VLB-7, .75 HP, 60 Hz, 3 PH, 230/460 volt, stainless steel 6'-2" long shaft and 3 blade 12" dia. prop, mounted on 71" long wooden frame. Also has Saftronics solid state motor control, PC 3inverter Model #CIMR-PCU21P5.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99034

Silver Streak Mixer, Model #GS-12, 3/4 HP, 230/460, 3 phase, 1 9-1/2" prop, 36" L. shaft stainless steel, cup mount, gear box.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2790

Lightnin mixer, Model XJ-87, .87 hp, 208, 230 / 460 volt, 3 ph, cup mount not complete, stainless steel shaft and prop, 46.5" shaft, one 12" prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99537

Lightnin Mixer, motors only, model ND-2A-UM, 3/4 HP, 180/200 DC volts.

MIXERS
PHOTO AVAILABLE
CLICK HERE

3277

Lightnin Mixer, 1 HP, 115/230 volt, 1PH, cup mount, 4' 6" long shaft & 6" dia three blade prop both stainless steel.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2804

Chemineer mixer, Model # PGA-10, 1 hp, 220 / 440 volt, 3 ph, cup mount, no shaft or prop,
gear box 430 rpm out.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2170

Lightnin Mixer, model ND3A, 1 HP, 230/460, 3 phase, gearbox, 72" shaft with 2 - 11-1/2" dia prop, has a broken prop blade.

MIXERS

9677

Lightnin Mixer, Model ND3, Serial #6711452, 1 H.P., 208/220/440/3 ph., cup mount, no shaft, no prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98216

Lightnin Mixer, Model #NLDG-100, S/N 82/54460, 1 HP, 1140 RPM, 230/440 volt, 3 ph., no shaft or prop.

MIXERS

2169

Mix-Mor Mixer, model G11, 1 HP, 230/460, 3 phase, gearbox, shaft bent, one 12" prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99474

Lightnin Mixer, Dura-Mix, XJQ1.17, 1.17 HP, 230/460 volt, 3 PH, fixed mount, gear reduced, no shaft or prop, shaft would be flange mount.

MIXERS
PHOTO AVAILABLE
CLICK HERE

3196

Lightnin mixer motor only, 3 hp, 115/230 volt, 1 ph, Model F7783026V66, frame F05647. rpm 1725 / 1425

MIXERS
PHOTO AVAILABLE
CLICK HERE

2341

Lightnin Mixer, Model NLG300, 1 1/4 inch shaft diameter with GE Motor Model 5K213GG2586, 3.0 horsepower, 1750 RPM 208-220/440 volts; 9 - 4.5 amps; 60 hz; 3 phase, rigid mount; gearbox, NEEDS REPAIR!

MIXERS
PHOTO AVAILABLE
CLICK HERE

2357

Lightnin Mixer Model ND4B; diameter of shaft is 5 inches; equipped with GE Motor Model 5K182GK266A, 3.0 horsepower; 9.2/4.6 amps; 60 hz; 3 phase; Frame: 182TY; Cup mount; Gearbox, NEEDS REPAIR!

MIXERS
PHOTO AVAILABLE
CLICK HERE

97196

Lightnin heavy duty angle gear box drive mixer no shaft or prop, ratio 31.4, RPM out 56, Westinghouse motor, 5 HP, 3 ph, 230/460 volt, Model #73C5, S/N 09485741, needs repairs.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2792

Mixmor mixer, 5 hp, 208, 230 / 460 volt, 3 ph, fixed mount, stainless steel shaft and props, 72" long shaft, two 14" props.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2087

Lightnin Mixer, Model #74-Q-5, 5 H.P., 460 volt, 3 ph, right angle drive, 1175 rpm in, 30 rpm out, 3" diameter 20' long shaft, 80" 3 blade prop shaft and prop are carbon steel.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2315

Philadelphia Mixer, model P25F355A/V-10-P, s/n 58731, 7.5 hp, 460 volt, 3 ph, 84 rpm outgear box, 2.25" diameter X 115" long stainless steel shaft, rigid mount

MIXERS
PHOTO AVAILABLE
CLICK HERE

2317

Lightnin Mixer Model 94C 7.5 2 1/2 inch shaft; equipped with Siemens Electric Motor Model 118, 7.5 horsepower, 1155 rpm; 230/460 volt;21.3/10.8 amps, 60 hz; 3 phase; frame 254T, rigid mount; gearbox

MIXERS
PHOTO AVAILABLE
CLICK HERE

2251

Lightnin Mixer, gear box and mount only, model 316-TEQ-10.2, 125 rpm out, reducer ratio 14, 10 HP.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2284

Lightnin Mixer, model 73Q10, 10 HP, 460 Volt, 3 phase, no shaft or prop, right angle gear box, 100 rpm out.

MIXERS
PHOTOS AVAILABLE
PHOTO 1, PHOTO 2

2346

U.S. Electric Motor, 10.0 horsepower; Cat. # A10S2C, Model 6791, Frame 256UDZ, Type JAD, Enclosed: TE; 3 phase; Max amb. 40C; Class B Insulation, Continuous duty; 1770 rpm; SF 1.15 HZ 60; 460 volts; NEMA Nominal Efficiency. 88.5; amps 12.9; Code F, DES B, MOTOR ONLY

MIXERS
PHOTO AVAILABLE
CLICK HERE

2285

Lightnin Mixer, model 73Q10, 10 HP, 460 volt, 3 phase, right angle gear box, no shaft or prop, motor grounded, NEEDS REPAIR!

MIXERS
PHOTO AVAILABLE
CLICK HERE

2336

Lightnin Mixer Model XQ-100H, 72 inch long shaft, 2 inch diameter; with Reliance Electric Motor 1.0 horsepower; 1140/950 rpm; 208-220/440 volt; 4.2/2.1 amps; 60/50 hz; 3 phase; Frame: WU180TZ; rigid mount; gearbox.

MIXERS

2350

Mixer Shaft - stainless steel, 2 3/16 inch diameter x 132 1/4 inch long; 10 bolt mounting flange, 1 3/4 inch centers shaft concentirc 17 to 21 inches off the bottom of the shaft; no prop included.

MIXERS
PHOTO AVAILABLE
CLICK HERE

2351

Mixer shaft - stainless steel, 1 1/2 inch diameter x 100 inches long; 4 bolt mounting flange, 2 3/4 inch centers. One prop - 3 blade x 15 inch diameter inches, stainless steel.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98109

Mixer Gear Box and shaft only, no motor, EMI, Model XTO-4, 74" long shaft with 22" dia prop.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98162

Lightnin Mixer, NLDG-150, gear box froze.

MIXERS
PHOTO AVAILABLE
CLICK HERE

98308

Mixer mounting flange.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99004

Cleveland Mixer, 60" long shaft w/(1)-10" prop, flange mount, 440 volt, 3 PH.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99033

Lightnin air mixer, two 4" props, 49" long shaft stainless steel, needs repair.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99062

Mix Mor Air Mixer, Model GA-11, S/N 50016-2, no shaft.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99268

Lightnin Mixer, Model XJQ-174, 1.74 hp, 230/460 volt, 3 phase, gear box, 350 rpm out, no shaft or prop.

MIXERS

99471

Mixer prop 3/4" bore 10.5" diameter.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99528

Lightnin Air Mixer, model ARL, no shaft or prop, needs repair

MIXERS
PHOTO AVAILABLE
CLICK HERE

99529

Mixer, 115 volt, 17" shaft with one 3-1/2" prop. No brand or HP

MIXERS
PHOTO AVAILABLE
CLICK HERE

99531

Mixer mount only.

MIXERS
PHOTO AVAILABLE
CLICK HERE

99532

Mixer mount only.

MIXERS 2802 Mixer stainless steel shaft and props only, shaft 71" long, .5" dia, two 13" props
MIXERS 2788 Mixer stainless steel shaft and props only, shaft 10' long, 1.5" dia, two 13" props
 

Equipment Inventory - links


Water Works --
A Division of Polydisc, Inc.
P.O. Box 122 / 501 Foote Street
Crown Point, Indiana  46307
toll free: 800.232.9334
ph: 219.663.8210

fax: 219.662.1503